Help me
Hi,
I want to put channel between two red curve with 1mm size bagutte. Please help me to put channel between curve.
Thanks
Regard,
Kamal
Views: 76
- Attachments:
Replies to This Discussion
-
Permalink Reply by pat schmidt on -
what size bagutte 1mm x ?
-
Permalink Reply by Kamal Soni on -
width 1mm for all bagutte and length according to curve, if distance between curve less then 1mm We will not put bagutte there.
pat schmidt said:what size bagutte 1mm x ?
-
Permalink Reply by pat schmidt on
-
If I had to do it first of all it would be very hard to get baquettes shaped like that but I would delete the hole , layout your stones and do some cutter operations to get something like this...I did not make the stones or use cutters or do it acuratly...something for you to do just showing you one possible way
-
Permalink Reply by Kamal Soni on
-
Thanks for your reply
pat schmidt said:If I had to do it first of all it would be very hard to get baquettes shaped like that but I would delete the hole , layout your stones and do some cutter operations to get something like this...I did not make the stones or use cutters or do it acuratly...something for you to do just showing you one possible way
-
Permalink Reply by pat schmidt on
-
not the best answer ...but an answer....
RhinoGold, 3D jewelry design software | Time to adapt to new technologies | Don't get left behind & Happy Designing
Translate
Notes
Yes, you can design in 3D! Learn.RhinoGold.com
Learning 3D Has never been that handy!
Step-by-Step Real Tutorials, Videos, Webinars, ALL what you needto become a 3D Expert with RhinoGold
Choose between a Public or Private Plan:…
Created by Xavier Rofes Oct 9, 2012 at 9:03am. Last updated by Xavier Rofes Nov 5, 2012.
© 2013 Created by Rafael del Molino.
