Replies to This Discussion

Permalink Reply by digixtra on April 26, 2012 at 4:24pm

Hi Andreas

Thank you for pointing out the basic concepts. I guess I'm more comfortable with the first way of modelling and it is just a matter of thinking outside the comfort zone. ..And your the guide line is a big help.

Regards

Kent.

• ▶ Reply

Permalink Reply by pat schmidt on April 26, 2012 at 9:24pm

how about a little tutorial on how you would go about modeling the ring andreas?

• ▶ Reply

Permalink Reply by pat schmidt on April 26, 2012 at 11:44pm

I worked on it a little here's my rendition ..I didn't finish the center section (the bar)

• ▶ Reply

Permalink Reply by digixtra on April 26, 2012 at 11:48pm

Hi Pat,

That 's pretty good pat. So how about you show us a little detail how you approached this model :))

Kent

pat schmidt said:

I worked on it a little here's my rendition ..I didn't finish the center section (the bar)

• ▶ Reply

Permalink Reply by pat schmidt on April 27, 2012 at 12:00am

I was hoping one of the pro's would help as I'm not that good but here goes.....I did it as a series of 1&2 rail sweeps (red lines and cyan lines)  the blue colored lines was a network surf, the insides were lofts and sweeps...this was my first attempt but I think I may have discovered an easier/faster way

• ▶ Reply

Permalink Reply by digixtra on May 14, 2012 at 4:22pm

Hi Pat,

I have a question for you. I recollect of old posts that you've used Cad Wax plugin. I'm consider to buy one but want to have your opinion on the usefullness and compatibility with Rhino...

Thanks

Kent T.

pat schmidt said:

I was hoping one of the pro's would help as I'm not that good but here goes.....I did it as a series of 1&2 rail sweeps (red lines and cyan lines)  the blue colored lines was a network surf, the insides were lofts and sweeps...this was my first attempt but I think I may have discovered an easier/faster way

• ▶ Reply

Permalink Reply by George on May 14, 2012 at 6:47pm

I would trace the outline edges and build from surfaces. When is this clayoo program coming out?

digixtra said:

Hi Pat,

I have a question for you. I recollect of old posts that you've used Cad Wax plugin. I'm consider to buy one but want to have your opinion on the usefullness and compatibility with Rhino...

Thanks

Kent T.

pat schmidt said:

I was hoping one of the pro's would help as I'm not that good but here goes.....I did it as a series of 1&2 rail sweeps (red lines and cyan lines)  the blue colored lines was a network surf, the insides were lofts and sweeps...this was my first attempt but I think I may have discovered an easier/faster way

• ▶ Reply

Permalink Reply by pat schmidt on May 15, 2012 at 4:12am

cadwax works fine with rhino and r.gold ....nice for making ring bases to work off of... adding stones ect.....

• ▶ Reply

Permalink Reply by digixtra on May 15, 2012 at 4:37am

Thank you for the info...

KT

• ▶ Reply

▶ Reply to Discussion