Replies to This Discussion

Permalink Reply by Diana Silva on November 2, 2011 at 6:11pm

Yeah sure i'll wait for it. Thank you very much!!!

Tariq Abdul Rauf said:

I will try to make a video for how to make that ball, I did that years ago it will take some time if you can wait for it

 

Diana Silva said:

Hi I want to try to model this as a pair of stud earrings but i dont know how to make the soccer ball. I tried to use the command array in surface but i dont know exactly how to make it work. 

Thanks if you can help me

Permalink Reply by digixtra on November 3, 2011 at 1:41am

Yes please Tariq...I would like to see it too.

Thanks

Tariq Abdul Rauf said:

I will try to make a video for how to make that ball, I did that years ago it will take some time if you can wait for it

 

Diana Silva said:

Hi I want to try to model this as a pair of stud earrings but i dont know how to make the soccer ball. I tried to use the command array in surface but i dont know exactly how to make it work. 

Thanks if you can help me

Permalink Reply by Tariq Abdul Rauf on November 8, 2011 at 5:09pm

 

Here is the link to watch the video, this was my own technic to model I hope someone know better way, will be nice to

show us a better way.

If the RhinoGold staff find this video usefull to be in the video section please feel free to reupload it.

Hope it helps.

The link on VIMEO :   http://vimeo.com/31790216

Diana Silva said:

Hi I want to try to model this as a pair of stud earrings but i dont know how to make the soccer ball. I tried to use the command array in surface but i dont know exactly how to make it work. 

Thanks if you can help me

Permalink Reply by Aleksandar V.Todorov on November 8, 2011 at 8:11pm

The video is awesome. I personally can't think of an easier way to do it. Thanks!

Permalink Reply by Tariq Abdul Rauf on November 12, 2011 at 6:40am

Direct link to download the ball video:

http://dl.dropbox.com/u/42099356/Ball.mp4

Permalink Reply by Hanna A. on November 22, 2011 at 12:14am

Hi, i want to learn how to model this ring. I have tried several methods but i want some guidance from some1 who has better knowledge and experience than myself. Thanks :)

Attachments:

• IMG_0216.JPG, 134 KB

Permalink Reply by Diana Silva on November 22, 2011 at 5:17pm

Thank you very much for the video!!!

It helped me a lot, thank you very much again!!

Permalink Reply by pat schmidt on November 22, 2011 at 7:31pm

what did you come up after trying the 'several methods'?

Hanna A. said:

Hi, i want to learn how to model this ring. I have tried several methods but i want some guidance from some1 who has better knowledge and experience than myself. Thanks :)

Permalink Reply by Hanna A. on November 22, 2011 at 7:40pm

Iv uploaded a pic of what i came up with, but for some reason it looks a little off i feel.

Attachments:

• Design Rendered.jpg, 108 KB

Permalink Reply by Tariq Abdul Rauf on November 22, 2011 at 10:53pm

Dosen't look bad, just need some curves and prongs to be more closer to the image.

Hanna A. said:

Iv uploaded a pic of what i came up with, but for some reason it looks a little off i feel.

Permalink Reply by Hanna A. on November 23, 2011 at 4:47pm

Thanks Tariq, ill try working on that :) Also, id like to take ur advice on how to place the gems. I found the gems by 2 curves option the simplest but after extruding the petals, i was unable to do that, so i had to manually add them. is there any other better way to do that?

Permalink Reply by Mollie Burford on November 25, 2011 at 8:57am

Hi guys,

I would like to learn how to model bypass rings. Here are two examples I'm very interested in. Thanks!

 

Best wishes,

Mollie

• ‹ Previous
• 1
• 2
• 3
• 4
• 5
• 6
• Next ›
• Page