smart grid

Replies to This Discussion

Permalink Reply by Alberto Rojas on April 17, 2011 at 11:38pm

Hi Jan:

You can change the size between minor grids line to 1mm and it will appear all the time; in order to do it you must go to Tdm logo/Settings/Dimensions/Grid, and then change the value and click OK. Hope is what you are asking for.

Alberto

• ▶ Reply

Permalink Reply by Jan Phillips on April 18, 2011 at 9:46am

Thanks Alberto unforunatley this does not work ,it always goes back to its default setting. are you using rhinogold 3 ?

do i have to disable the smart grid ?

I like using the smart grid its just that you have to zoom in so much to get 0.1 mm grid spacing that i use most of the time.

i would like to reduce the amount that you have to zoom in if possible.

regards

Jan

• ▶ Reply

Permalink Reply by Alberto Rojas on April 18, 2011 at 5:55pm

Hi Jan:

My guessing is that you have to disable the smart grid, I have modified and used not enabling smart grid on Rhinogold 3.0 before the smart grid option was launched, after you change the distance in minor grids be sure to accept the changes, hope it works.

Alberto

• ▶ Reply

Permalink Reply by Jan Phillips on April 20, 2011 at 8:37am

Thanks Alberto

will try

regards

Jan

Alberto Rojas said:

Hi Jan:

My guessing is that you have to disable the smart grid, I have modified and used not enabling smart grid on Rhinogold 3.0 before the smart grid option was launched, after you change the distance in minor grids be sure to accept the changes, hope it works.

Alberto

• ▶ Reply

▶ Reply to Discussion