RhinoGold

stl repair help

hi,

when exporting this design to stl file i got trouble with this naked edge!

i tried the stl wizard for automatic repair- its creating a whole surface in the middle.

also tried connect surface+ blend, as well as creating a surface via 2 rails

...so far no luck!

any suggestions apreciated-thanks*

Views: 68

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by nahum navarro on February 21, 2012 at 6:45pm

Hi! Have you tried loft?? If not... use it, and also try the Join 2 naked edges button, its on analize features.... :)

Permalink Reply by johanna on February 21, 2012 at 7:10pm

hi,

thanks for the advice.

actually already figured it out...


 
nahum navarro said:

Hi! Have you tried loft?? If not... use it, and also try the Join 2 naked edges button, its on analize features.... :)

Permalink Reply by Bokeh on February 21, 2012 at 7:30pm

wots the answer?

Permalink Reply by Francisco Rosende on February 21, 2012 at 7:42pm

When you create the new surface use the edges of the others surfaces, and the cross sections another edge.

▶ Reply to Discussion

RSS

RhinoGold, 3D jewelry design software | Time to adapt to new technologies | Don't get left behind & Happy Designing

Translate

Notes

2-minutes Survey to improve RhinoGold Render Studio

Hi,

 

The RhinoGold Team is working on the new RhinoGold Render Studio 3.5 and we are willing to know your opinion about it.



We have created a short survey to know your valuable suggestions. Please, click on the next link to be redirected to the survey. It will take no longer than 2 minutes!



Click here



We highly appreciate your ideas and be sure that we will work hard…

Continue

Created by Xavier Rofes Mar 5, 2012 at 3:35pm. Last updated by Xavier Rofes Mar 5.

© 2012   Created by Rafael del Molino.   Powered by

Badges  |  Report an Issue  |  Terms of Service

Sign in to chat!