"Hot 3Dstuffmaker Printer Packs 3Dstuffmaker a division of Iprint Technologies sets new standards and provides a highly cost-efficient means of producing numerous designs through its various models. They are used extensively by Inventors,…"

"I've been very pleased with my UP! printer. I have made almost 2,000 Bronze rings this year and every one has been cast from an ABS master grown on the UP. I have also found it great for making small skulls which can be cast hollow. I have a…"

"Hi Julian Chatt              I am very glad about your UP 3D printer. I am also much interested with 3D printing but i am using 3Dstuffmaker www.3dstuffmaker.com printer nearly 1 year.…"

"I had problems with breaking fine bits but I worked out that it is a problem with electrical conduction in the spindle unit. When it conducts electricity 100% the Z calibration is perfect. Sometimes the lubricant inside the spindle housing acts as…"

"Yes I do but I'd not recommend it for producing 20 models a week, every week. If I could only have one mill it would have to be the JWX 10, the 40 is probably as good, maybe better but I have no experience of it. "

"I have an MDX 15 and JWX 10. I have never had any problems with calibration ? The JWX 10 is automatic and takes only a few minutes the first time to set X,Y & Z when installing new fixtures. When changing a tool, resetting the Z axis is only…"

"https://www.nano-cemms.illinois.edu/materials/3d_printing_full"

"There are several machines on the market now that are using LED's to cure the resin. Unlike an inkjet printer there are no pipes or nozzles to block, the resin is simply poured into an open tray and only touches a flat build plate which is…"

"I asked as I was curious as to the color and the durability I know khay said it was red but I hadn't heard any mention of the color yet so I was checking to see on the release, color, casting specs, durability and such..."

"That's good news.  It would be such a shame to burn it away to nothing if it was a 'bad' colour. "

"here is what they sent me today about the 'mew' material Hi P Schmidt The color of our new material including all the relevant casting info will be released as part of the launch.  It is a good color to check surface & detail…"

"Yes Rafa I have the models I told the guys about how you can pre-polish them with some what we call Goof Off...I don't know much about the microns but they sent me a 10 and a 25...there are grow lines and I would not cast them as is without…"

"I have received a few samples from them, and the red material is apparently only days away from launch but they have been saying this for two weeks. the resolution is still rougher than that on my micro. the layers look 'feathery' and…"

"Pat, Did you see a physical model? What about resolution? Thanks, Rafael del Molino TDM Solutions SL"

"I wish I was coming out with $7000.00 in a few weeks"

"Read where they have a Red castable resin coming out in a few weeks. "